parkhurst_header1
 Call-Now-Button-1
 dist-Button-1

LM1628

Hoist_16282MODEL LM1628 

PERFORMANCE YOU CAN DEPEND ON!

Here's the single-cylinder scissors hoist designed for today's increased capacity truck bodies.  The higher capacity rating of the LM1628 increases its usage range along with unique low silhouette 4-way mounting option for maximum efficiency and fast mounting with minimum amount of truck body interference.  Extensive use of high-strength steel has reduced weight without sacrificing performance or durability.  Standard double acting, power-up/power-down hydraulic cylinders permit precise load control and prevent kickback.  Oil bypass in the cylinder allows oil to return to tank rather than creating excessive pressures if control is accidentally left in lift position.  Maximum pressure is applied only when needed to lift the load.  LM1628 is built to Parkhurst quality standards and backed by a full one-year material and workmanship warranty.

4-Way Mount

Simplifies mounting...avoids most truck chassis crossmember problems and axle interference common with competitive hoists. Minimum interference with truck and body members because hoist is exclusively profiled to take the lease amount of space for the performance delivered.

 

LM1628 Specifications
 NTEA Class F/60 Rating
RECOMMENDED USAGE
 
Cab to Axle
102 – 150 CA, 11’ – 18’ Body Length
Body Longbeams, Minimum
7” x 9.8 #/ft.
TRUCK FRAME REQUIREMENTS
108 – 120 CA, 500,000 in./lb. RBM
126 – 150 CA, 550,000 in./lb. RBM
HOIST DATA
 
Cylinder
One, 6” Bore, 28.5” Stroke w/Internal Relief
Piston Seals
H.D. Square Poly Seal and Two Wear Rings
Shaft Seals
Poly Pack Seals
Shaft
2.25 Dia. Chromed
Hoist Settings for Dump Angle
45° = 125.62”,  50° = 113.88”,   55° = 104.12”
Hoist Opening
101.94#
Cycle Time of Pump @ 800 RPM:
 
    Double Acting
Raise 23 sec., Lower 19 sec.
    Single Acting
Raise 23 sec., Lower 11 sec.
Mounting Height
8” – 12.25”
Weight
 
Hoist w/One Body Prop
796 lbs.
twitter g youtube

Distributors

NTEA_LOGO_NEW2