parkhurst_header1
 Call-Now-Button-1
 dist-Button-1

LM1622/LM1626

LM1622 / LM1626

LM1622MODEL LM1622 / 1626 
....performance you can depend on!
Here's the single-cylinder scissors hoist desgined for today's increased capacity truck bodies. The higher capacity rating of the LM1626 increases its usage range. Both the LM1622 and LM1626 have unique low silhouette 4-way mounting options for maximum cutting and boxing. Extensive use of high-strength steel has reduced weight without sacrificing performance or durability. Standard double acting, power-up/power-down hydraulic cylinders permit precise load control and prevent kickback. Oil bypass in the cylinder allows oil to return to tank rather than creating excessive pressures if control is accidetally left in lift position. Maximum pressure is applied only when needed to lift the load. Both units are built to Parkhurst quality standards and backed by a full one-year material and workmanship warranty.

 4-Way Mount Simplifies mounting...avoids most truck chassis crossmember problems and axle interference common with competitive hoists. Minimum interference with truck and body members because hoist is exclusively profiled to take the lease amount of space for the performance delivered.

HOIST MODEL
LM1622-NTEA “D/40” Rating
LM1626-NTEA “E/50” Rating
RECOMMENDED USAGE
 
 
Cab to axle
84 –138” CA, 10 –17’ Body Length
102” -150” CA, 11’-18’ Body Length
Body Longbeams, Min
84”-108” CA, 6”x8.2
84”-108” CA, 7”x9.8  16/ft
TRUCK FRAME REQUIREMENTS
84”-108” CA 340,000 in/lb RBM*
108”-120” CA, 475,200 in/lb. RBM*
 
114”-126” CA, 425,000 in/lb RBM*
126”-150” CA, 540,000 in/lb RBM*
 
132” -138” CA,594,000 in/lb RBM*
 
HOIST DATA
 
 
Cylinders
One,6” Bore,22.00” Stroke w/internal relief
One, 6.00” Bore, 26.12” Stroke w/internal relief
Piston Seals
H.D. Square Poly Seal & Two Wear Rings
H.D. Square Poly Seal & Two Wear Rings
Shaft Seals
Poly Pack Seals
Poly Pack Seals
Shaft
2 ¼” dia. Chromed
2 ¼” dia. Chromed
Hoist Settings For Dump Angle
45”=102.5”; 50”=93”; 55”=84.75”
45”=117.5”; 50”=106.5”; 55”=97.0”
Hoist Opening
82.5”
93.06”
Cycle Time of Pump @800 RPM
 
 
    Double Acting
Raise 27 sec; Lower 23 Sec
Raise 21 Sec; Lower 17 Sec
    Single Acting
 
Raise 21 Sec; Lower 10 Sec
Mounting Height
7” or 11.25”
8” or 12.25”
WEIGHT
610 lbs
750 lbs
 
 
 
*Frame Rail Section Modulus & Yield Strength (psi) of Steel in Frame Rail = RBM
twitter g youtube

Distributors

NTEA_LOGO_NEW2